Note:
- Place the motorcycle on a suitable stand.
- Make sure that the motorcycle is upright.
2. Remove: final drive housing oil filler bolt (1)
3. Check: final drive oil level
The final drive oil level should be to the bottom brim (2) of the filler hole.
Below the bottom brim → Add the recommended final drive oil to the proper level.
![](https://motoinstruction.ru/img/yamaha/16/122219.jpg)
Recommended final drive oil: SAE 80 hypoid gear oil graded "GL-4", "GL-5" or "GL-6" or multi-purpose SAE 80W90 hypoid gear oil.
4. Install: final drive housing oil filler bolt: 23 Nm (2.3 m·kg)