Installing the crankshaft (Yamaha FZ1)

0

1. Install:

• Crankshaft journal upper bearings «1» (into the upper crankcase)

2. Lubricate:

• Crankshaft journal upper bearings (with the recommended lubricant)

Recommended lubricant: Engine oil.

Notes:

• Align the projections «a» on the crankshaft journal upper bearings with the notches «b» in the upper crankcase.
• Be sure to install each crankshaft journal upper bearing in its original place.

3. Install:

• Crankshaft

4. Install:

• Crankcase (lower)

Refer to «Crankcase».

5. Install:

• Pin
• Pickup rotor «1»
• Drive sprocket «2»

Drive sprocket bolt: 60 Nm (6.0 m·kg, 43 ft·lb).

See this article in russian language

Article about repair motorcycles «Yamaha Fazer FZ1» (2006-2015): «Installing the crankshaft»: https://motoinstruction.ru/en/Yamaha/Fazer/FZ1/engine/repair/110835 <a href="https://motoinstruction.ru/en/Yamaha/Fazer/FZ1/engine/repair/110835">Installing the crankshaft</a> - article about repair motorcycles «Yamaha Fazer FZ1» (2006-2015) from section «Engine repair». [url=https://motoinstruction.ru/en/Yamaha/Fazer/FZ1/engine/repair/110835]Installing the crankshaft[/url] - article about repair motorcycles «Yamaha Fazer FZ1» (2006-2015) from section «Engine repair».