General tightening torque specifications (Yamaha FZ1)

0

This chart specifies tightening torques for standard fasteners with a standard ISO thread pitch. Tightening torque specifications for special components or assemblies are provided for each chapter of this manual. To avoid warpage, tighten multi-fastener assemblies in a crisscross pattern and progressive stages until the specified tightening torque is reached. Unless otherwise specified, tightening torque specifications require clean, dry threads. Components should be at room temperature.

A (nut)	B (bolt)	General tightening torques
		Nm	m·kg	ft·lb
10 mm	6 mm	6	0.6	4.3
12 mm	8 mm	15	1.5	11
14 mm	10 mm	30	3.0	22
17 mm	12 mm	55	5.5	40
19 mm	14 mm	85	8.5	61
22 mm	16 mm	130	13.0	94

See this article in russian language

Article about repair motorcycles «Yamaha Fazer FZ1» (2006-2015): «General tightening torque specifications»: https://motoinstruction.ru/en/Yamaha/Fazer/FZ1/owner/spec/110709 <a href="https://motoinstruction.ru/en/Yamaha/Fazer/FZ1/owner/spec/110709">General tightening torque specifications</a> - article about repair motorcycles «Yamaha Fazer FZ1» (2006-2015) from section «Technical characteristics». [url=https://motoinstruction.ru/en/Yamaha/Fazer/FZ1/owner/spec/110709]General tightening torque specifications[/url] - article about repair motorcycles «Yamaha Fazer FZ1» (2006-2015) from section «Technical characteristics».