Electrical system installation (Aprilia Shiver 750)

Main
Aprilia
Shiver
SL 750
Electric equipment
Equipment and devices
Electrical system installation

Contents: Scope and applicability ↓ Materials used and corresponding…↓ Motorcycle division ↓

Scope and applicability

The position of the cable harnesses, how they are fixed to the motorcycle and potential problems are defined on the following sections in order to reach the objectives of vehicle reliability.

Materials used and corresponding quantities

The electrical system consists of the following cable harnesses and parts:

1 Main Cable Harness
1 Filter Casing Cable Harness
1 Rear light Cable harness
1 Relay-Starter Motor Cable
1 Battery - Engine Ground Cable
2 Caps for Magura Switches
1 Injection Main Relay
6 Relays 12 V / 30 A
1 Start-up Relay
Medium black clamps 178 x 4 (7.01 x 0.16 in)
Small black clamps 98 x 2.5 (3.86 x 0.01 in)
1 10-cm (3.94 in) spiral for start-up cable
1 Pick-Up divider cable harness (if fitted)

Motorcycle division

The wiring distribution is subdivided in three essential sections, as indicated in the figure.

1. Front section; 2. Central section; 3. Rear section

See this article in russian language

This article has been reviewed: Serafim Sazonov

◀ Previous

Aprilia SL750 : Equipment and devices

Next ▶

Electrical components arrangement

Special checks for the correct connection and laying of cables
Electrical components — front side
Electrical components — central part
Electrical components — back side

Similar articles about motorcycles of other brands

Electrical system diagnosis and troubleshooting Suzuki V-Strom DL-650 (2004-2011)
Electrical system exploded view Kawasaki ZX6R/ZX600J (2000-2002)
Electrical system — specifications Honda Africa Twin 750 (1989-2003)
Diagnosis of electrical system faults Harley-Davidson V-Rod (2002-2006)
Immobilizer system Yamaha FZ1 Fazer (2006-2015)

Link to this article in different formats

TEXTHTMLBB Code

Comments and feedback from visitors

No comments yet, you will be the first!