Turn engine on to its side.
Remove screws on right side.
Turn engine on to its side.
Remove screws on left side.
Remove upper section of crankcase.
Disassembling crankcase (BMW R1150GS)
Turn engine on to its side.
Remove screws on right side.
Turn engine on to its side.
Remove screws on left side.
Remove upper section of crankcase.
See this article in russian language
Removing radial shaft seal from crankshaft with engine installed
Removing oil pump
Removing auxiliary shaft drive
Removing and installing alternator mount cover with engine installed
Removing and installing conrod
Removing and disassembling piston
Removing cylinder
Disassembling, checking, repairing and reassembling cylinder head
Removing cylinder head
Disassembling/assembling valve gear carrier
Removing oil pump
Removing auxiliary shaft drive
Removing and installing alternator mount cover with engine installed
Removing and installing conrod
Removing and disassembling piston
Removing cylinder
Disassembling, checking, repairing and reassembling cylinder head
Removing cylinder head
Disassembling/assembling valve gear carrier
Removing crankshaft, auxiliary shaft and timing chain tensioning and slide rails
Removing and installing oil intake strainers
Replacing oil level sight glass
Removing and installing oil thermostat
Removing and checking conrods
Measuring crankshaft bearing play
Measuring big end bearing play
Installing conrods
Installing crankshaft
Assembling engine block
Removing and installing oil intake strainers
Replacing oil level sight glass
Removing and installing oil thermostat
Removing and checking conrods
Measuring crankshaft bearing play
Measuring big end bearing play
Installing conrods
Installing crankshaft
Assembling engine block
Similar articles about motorcycles of other brands
Yamaha FZ1 Fazer (2006-2015): Disassembling the crankcase
Suzuki DRZ 250 (1996-2007): Disassembling the carburetor (E-03, E-28)
Triumph Rocket III (2004-2018): Exploded view — crankcase fixings
Kawasaki ZX6R/ZX600J (2000-2002): Crankcase — splitting
Honda VTX 1800 C (2001-2008): Crankcase ventilation
Ducati ST2 (1997-2003): Disassembling fuel tank components
Harley-Davidson V-Rod (2002-2006): Upper and lower crankcase — disassembly
Aprilia RS 125/3 (1998-2005): Disassembling the stanchion tubes — sliders
Link to this article in different formats
TEXTHTMLBB Code
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Maintenance
- Engine and systems
- Engine repair
- Fuel and exhaust systems
- Transmission
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear wheel drive
- Wheels and tires
- Brake system
- Electric equipment
- Equipment and devices
- Starting and charging system