Removing
To remove the rear trim the seat must be removed (see «Seat - removal and installation») and tail light (see «Rear position lamp and brake signal - removal and installation»).
1. Using a Phillips screwdriver, unscrew the four screws 1 fastening the cladding. Using a 10 mm spanner, unscrew the two bolts 2 securing the lining to the frame.
![](https://motoinstruction.ru/img/honda/1/110530.jpg)
2. Using a Phillips screwdriver, unscrew the two screws securing the rear wheel arch liner to the trim. The screws are located in the niche of the tail light.
![](https://motoinstruction.ru/img/honda/1/110531.jpg)
3. Remove the lining.
![](https://motoinstruction.ru/img/honda/1/110532.jpg)
Installation
Install the cladding in reverse order.