Removing
To remove the left footpeg bracket, you must first remove the shift pedal assembly (see «Gear shift pedal - removal, installation and adjustment»).
Removing the left bracket
1. With an 8 mm hex wrench, unscrew the two bolts securing the left bracket of the footpegs.
![](https://motoinstruction.ru/img/honda/1/110556.jpg)
2. Remove the left bracket assembly with footpegs.
Removing the right bracket
1. Holding the nut with a 13 mm wrench, unscrew the muffler mounting bolt with an 8 mm hex wrench.
![](https://motoinstruction.ru/img/honda/1/110557.jpg)
2. Similar to item 1 (see above «Removing the left bracket») we unscrew the bolts of the right bracket and, holding, we take a little towards ourselves.
Attention! To loosen the front bracket mounting bolt, you will need to depress the brake pedal to the stop.
3. With a 6 mm hex wrench, unscrew the two bolts securing the rear brake master cylinder.
![](https://motoinstruction.ru/img/honda/1/110558.jpg)
4. Disconnect the brake sensor exhaust spring and the pedal return spring from the rear brake pedal.
![](https://motoinstruction.ru/img/honda/1/110559.jpg)
5. Using pliers, remove the cotter pin of the axis of the rod of the main brake cylinder.
![](https://motoinstruction.ru/img/honda/1/110560.jpg)
6. We take the axis of the rod and remove the left bracket of the steps.
![](https://motoinstruction.ru/img/honda/1/110561.jpg)
Installation
We install the footboard brackets in the reverse order.