Removing
1. Using a Phillips screwdriver, unscrew the nut securing the cable to the dashboard.
![](https://motoinstruction.ru/img/honda/1/110618.jpg)
2. Remove the cable from the dashboard by sliding it down.
![](https://motoinstruction.ru/img/honda/1/110619.jpg)
3. Using a Phillips screwdriver, unscrew the cable from the gearbox on the front wheel axle.
![](https://motoinstruction.ru/img/honda/1/110620.jpg)
4. Move the cable down and disengage it from the gearbox.
![](https://motoinstruction.ru/img/honda/1/110621.jpg)
5. Remove the cable from the motorcycle.
Lubricate the cable as described in «Control cables - check and lubrication».
Installation
We install in the reverse order, laying the cable along the left leg of the front fork.