1. With a 6 mm hex wrench, unscrew the axis of the gear shift pedal.
2. Using a 10 mm wrench, unscrew the locking bolt of the gear shift pedal bracket.
3. Remove the gear shift pedal clip by sliding it towards you.
Installation is carried out in the reverse order. Before installation, apply a thin layer of grease to the axis of the footrest. There are special points stamped on the pedal clamp and on the shaft, which must be combined when installing the bracket on the shaft.
The pedal position is adjusted by unscrewing or tightening the lock nuts 1 and 2 to increase or decrease the length of the rod 3.