Removing
1. Using pliers, remove the rear brake sensor spring.
![](https://motoinstruction.ru/img/honda/1/110648.jpg)
2. Use pliers to remove the rear brake pedal return spring.
![](https://motoinstruction.ru/img/honda/1/110649.jpg)
3. With the same tool, we take out the cotter pin of the main brake cylinder.
![](https://motoinstruction.ru/img/honda/1/110650.jpg)
4. Remove the drive axle.
![](https://motoinstruction.ru/img/honda/1/110651.jpg)
5. Using special pliers, remove the circlip of the pedal axis.
![](https://motoinstruction.ru/img/honda/1/110652.jpg)
6. Remove the spacer.
![](https://motoinstruction.ru/img/honda/1/110653.jpg)
7. Remove the rear brake pedal.
![](https://motoinstruction.ru/img/honda/1/110654.jpg)
Installation
We install the rear brake pedal in the reverse order, having previously lubricated the pedal axle with a thin layer of grease.