Removing
1. Using a Phillips screwdriver, loosen the screw that secures the starting enrichment cable.
![](https://motoinstruction.ru/img/honda/1/110636.jpg)
2. We remove the shell of the starting enricher from the mounting hole and move it aside.
![](https://motoinstruction.ru/img/honda/1/110637.jpg)
3. Move the cable boss and remove the cable.
![](https://motoinstruction.ru/img/honda/1/110638.jpg)
4. Using a Phillips screwdriver, unscrew the two screws of the steering switch block.
![](https://motoinstruction.ru/img/honda/1/110639.jpg)
5. Separate the halves of the body of the steering switch block and remove it from the steering wheel.
![](https://motoinstruction.ru/img/honda/1/110640.jpg)
6. We remove the boss of the starting enricher cable from the groove of the handle.
![](https://motoinstruction.ru/img/honda/1/110641.jpg)
7. Using a 12 mm wrench, unscrew the nut of the starting enrichment cable sheath.
![](https://motoinstruction.ru/img/honda/1/110642.jpg)
8. Extract rope.
![](https://motoinstruction.ru/img/honda/1/110643.jpg)
Installation
Install the starter cable in reverse order.