Attention!
- Flush the brake caliper components with new brake fluid before reassembling.
- Do not wipe off brake fluid from parts after washing.
- When washing parts, use appropriate brake fluid. Never use different types of brake fluid or cleaning fluids (gasoline, kerosene, solvent).
- Replace the removed seals and boots with new ones.
- Apply brake fluid to all seals and boots, piston and cylinder bores before assembly.
Brake fluid: DOT 4
When installing the brake master cylinder on the steering wheel, align the contacting surfaces of the clamp (1) with label (2) on the steering wheel and tighten to the appropriate torque (tighten the top bolt first).
GTZ clamp bolt: 10 Nm (1.0 kgf-m)
Tighten the fitting to the appropriate torque.
Brake hose connection: 23 Nm (2.3 kgf-m)
Warning! Remove air from the brake system after installing the turbocharger (section 2-17).
Adjust the free play of the lever (section 2-18).