Remove the caliper protection (section 5-48).
Remove the pads (section 5-48).
Disconnect the brake hose from the caliper (unscrew the fitting), drain the brake fluid into a suitable container.
Remove the brake caliper.
![](https://motoinstruction.ru/img/suzuki/4/112920.jpg)
Warning!
- Never reuse brake fluid that was left over from a previous change or that has been stored for a long time to avoid damage to the brake system.
- Brake fluid leaks threaten safe driving and damage paintwork. Therefore, check the hoses and connections for leaks.
Remove the brake disc protection.
![](https://motoinstruction.ru/img/suzuki/4/112921.jpg)
Remove the caliper mount (1).
Remove the spring (2).
![](https://motoinstruction.ru/img/suzuki/4/112922.jpg)
Using compressed air, remove the piston from the caliper (first cover the pistons with a rag).
![](https://motoinstruction.ru/img/suzuki/4/112923.jpg)
Attention! To avoid piston failure, do not use excessively high pressure.
Remove the boot and O-ring.
![](https://motoinstruction.ru/img/suzuki/4/112924.jpg)
Attention! Do not reuse removed seals to avoid brake fluid leaks.