Installing the drive shaft (Yamaha XVS 1100 Drag Star)

0

1. Lubricate: drive shaft splines

• Recommended lubricant: Molybdenum disulfide grease

2. Apply: sealant (onto both final drive housing mating surfaces)

• Yamaha bond No. 1215: 90890-85505

3. Install: drive shaft (to the final drive pinion gear)

4. Tighten: final bearing housing nuts: 42 Nm (4.3 m·kg)

5. Install: rear wheel assembly. Refer to "Rear wheel and brake disc".

See this article in russian language

Article about repair motorcycles «Yamaha Drag Star XVS 1100» (1998-2008): «Installing the drive shaft»: https://motoinstruction.ru/en/Yamaha/DragStar/XVS1100/engine/transm/114404 <a href="https://motoinstruction.ru/en/Yamaha/DragStar/XVS1100/engine/transm/114404">Installing the drive shaft</a> - article about repair motorcycles «Yamaha Drag Star XVS 1100» (1998-2008) from section «Transmission». [url=https://motoinstruction.ru/en/Yamaha/DragStar/XVS1100/engine/transm/114404]Installing the drive shaft[/url] - article about repair motorcycles «Yamaha Drag Star XVS 1100» (1998-2008) from section «Transmission».