Removing the right-hand rider footpeg bracket (Aprilia RS125/3)

0

Torque wrench settings:

• Screw (1): 3 Nm (0.3 Kgm)
• Screws (2): 10 Nm (1.0 Kgm)
• Screws (3): 22 Nm (2.2 Kgm)
• Screw (5): 2 Nm (0.2 Kgm)

Release and remove the screw (1).

Release and remove the two screws (2) and collect nuts, bushes, washers and guard (4).

Release and remove the two screws (3).



Remove the rider footpeg bracket together with brake master cylinder actuating rod, brake lever and rider footpeg.

If needed, unscrew the screw (5) and remove the chain tensioner.

See this article in russian language

Article about repair motorcycles «Aprilia RS-series RS 125» (1998-2005): «Removing the right-hand rider footpeg bracket»: https://motoinstruction.ru/en/Aprilia/RS/RS125-3/chassis/frame/112857 <a href="https://motoinstruction.ru/en/Aprilia/RS/RS125-3/chassis/frame/112857">Removing the right-hand rider footpeg bracket</a> - article about repair motorcycles «Aprilia RS-series RS 125» (1998-2005) from section «Frame and hinged elements». [url=https://motoinstruction.ru/en/Aprilia/RS/RS125-3/chassis/frame/112857]Removing the right-hand rider footpeg bracket[/url] - article about repair motorcycles «Aprilia RS-series RS 125» (1998-2005) from section «Frame and hinged elements».