Seat subframe removal (Aprilia RS125/3)

0

Torque wrench settings:

• Screw (1): 7 Nm (0.7 Kgm)
• Screws (2): 22 Nm (2.2 Kgm)

Remove the voltage regulator; see 7.2.3.

Remove the seat subframe lower moulded cover; see 7.1.12.

Remove the airbox; see 4.2.2.

Remove the oil tank; see 3.1.1.

Remove both passenger footpeg brackets; see 7.4.7.

Remove the seat latch; see 7.4.7.

Release and remove the screw (1) and collect the nut.

Move aside the rear brake fluid reservoir.

Warning! Keep the rear brake fluid reservoir in a vertical position to avoid spilling brake fluid. Any brake fluid spills could lead to a dangerous condition.

Release the seat subframe from all wiring ties.

Release and remove the two screws (2) working on both sides of the motorcycle.

Remove the seat subframe.

See this article in russian language

Seat — removal and installation Suzuki V-Strom DL-650 (2004-2011)
Exploded view — seat and tool kit Triumph Rocket III (2004-2018)
Removing the seat and battery Yamaha FZ1 Fazer (2006-2015)
Valve seat — inspection Kawasaki ZX6R/ZX600J (2000-2002)
Seat — removal and installation Honda CB 400 SF (1992-1999)

Article about repair motorcycles «Aprilia RS-series RS 125» (1998-2005): «Seat subframe removal»: https://motoinstruction.ru/en/Aprilia/RS/RS125-3/chassis/frame/112863 <a href="https://motoinstruction.ru/en/Aprilia/RS/RS125-3/chassis/frame/112863">Seat subframe removal</a> - article about repair motorcycles «Aprilia RS-series RS 125» (1998-2005) from section «Frame and hinged elements». [url=https://motoinstruction.ru/en/Aprilia/RS/RS125-3/chassis/frame/112863]Seat subframe removal[/url] - article about repair motorcycles «Aprilia RS-series RS 125» (1998-2005) from section «Frame and hinged elements».