Muffler with catalyst (Aprilia Shiver 750)
- Main
- Aprilia
- Shiver
- SL 750
- Information for owner
- Operation manual
- Muffler with catalyst
The vehicle is equipped with a muffler with a metal catalytic converter type «platinum - palladium - rhodium» with three functions.
This device oxidizes CO (carbon monoxide) and NS (unburned hydrocarbons), present in the exhaust gases, converting them into carbon dioxide and water vapor respectively.
Vehicle owners should be aware that the following activities may be prohibited by law.
Removal of any device or part of a new vehicle or any other action by any person resulting in the inoperability of such device or part intended to control noise levels (except as required for maintenance, repair or replacement) before the sale or delivery of the vehicle to the final buyer, as well as during the operation of the vehicle.
Use of a vehicle from which devices or parts have been removed, or devices or parts have been disabled.
Check the muffler and exhaust pipes for any signs of corrosion or holes and that the exhaust system is working properly.
If you notice an increase in the volume of the exhaust system, contact your authorized Aprilia dealer immediately.
The article is taken from the website: MotoInstruction
This device oxidizes CO (carbon monoxide) and NS (unburned hydrocarbons), present in the exhaust gases, converting them into carbon dioxide and water vapor respectively.
Attention!
- Do not leave the vehicle in a parking lot where the catalytic converter will be located next to dry bushes, or in places easily accessible to children, as the catalytic converter becomes very hot during operation; Therefore, be extremely careful not to touch the inverter until it has completely cooled down.
- Do not use leaded gasoline as it will cause permanent damage to the catalytic converter.
Vehicle owners should be aware that the following activities may be prohibited by law.
Removal of any device or part of a new vehicle or any other action by any person resulting in the inoperability of such device or part intended to control noise levels (except as required for maintenance, repair or replacement) before the sale or delivery of the vehicle to the final buyer, as well as during the operation of the vehicle.
Use of a vehicle from which devices or parts have been removed, or devices or parts have been disabled.
Check the muffler and exhaust pipes for any signs of corrosion or holes and that the exhaust system is working properly.
If you notice an increase in the volume of the exhaust system, contact your authorized Aprilia dealer immediately.
Note. No modifications to the exhaust system are permitted.
The article is taken from the website: MotoInstruction
See this article in russian language
This article has been reviewed: Serafim Sazonov
Similar articles about motorcycles of other brands
Removing the muffler and brake caliper Yamaha Drag Star 1100 (1998-2008)Exhaust pipe bolts and muffler bolts Suzuki Boulevard M109R (2006-2025)
Muffler and exhaust pipe — removal and installation Kawasaki ZX6R/ZX600J (2000-2002)
Muffler/exhaust pipe — removal and installation Honda VTX 1800 C (2001-2008)
Removing and installing muffler Harley Street 500 (2014-2021)
Link to this article in different formats
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Control devices
- Operation manual
- Technical characteristics
- Maintenance
- Engine and systems
- Engine repair
- Lubrication system
- Cooling system
- Fuel system
- Transmission
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear suspension
- Brake system
- Electric equipment
- Equipment and devices