When getting on or off a vehicle, make sure there are no obstacles to movements; do not hold any objects in your hands (helmet, gloves or goggles removed).
Enter and exit the vehicle only on the left side with the side support lowered.
The support is designed to support the weight of the vehicle and the minimum load, without additional weight of the driver and passenger.
The side support is designed to prevent the vehicle from falling or overturning when the driver and passenger get on it and prepare to move; The support should not be used to support the weight of the driver and passenger.
During boarding and disembarking, the vehicle may become unstable due to its weight and fall or tip over.
Attention! The driver must be the first to enter the vehicle and the last to leave the vehicle in order to control and balance the vehicle while boarding or disembarking a passenger.
When boarding or disembarking from a vehicle, the passenger must be careful to ensure that his or her movements do not cause the vehicle and driver to lose stability.
Attention!
- The driver must instruct the passenger on how to safely board and disembark the vehicle.
- The vehicle is equipped with passenger footrests to facilitate entry and exit. The passenger must enter and dismount the vehicle using the left step.
- It is prohibited to attempt to leave the vehicle by jumping off it or extending your leg to the ground. This is incorrect, as it may affect the stability and balance of the vehicle.
Attention! Any bags or objects attached to the rear of the vehicle may interfere with entry and exit. lift your right leg over the seat in a controlled motion to avoid hitting the rear of the vehicle (tail section or luggage) and not lose stability.