Remove seat.
Remove left cover.
Disengage throttle cable from adapter (arrow).
Remove circlip (5) from throttle-cable holder and disengage throttle cable.
Pull the cable out toward the handlebar.
Remove cover (4).
Remove fastener for throttle cable (1) from instrument cluster housing.
Disengage throttle-cable adapter (3) and disengage nipple (4).
Remove the throttle cable.
Installation is the reverse of the removal procedure: pay particular attention to the following.
Note: Make sure that the cable is not kinked when installed.
Adjust throttle-cable play with adjusting screw (5).
Throttle cable play: approx. 1 mm (0.04 in)
Tightening torques:
- Cover of multi-function switch: 1 Nm