Checking cooling system for leaks (BMW F650GS)

0

Remove left cover. See Group 46.

Open the filler cap on the radiator.



Connect pump, BMW # 17 0 500, with adapter and neck, BMW # 17 5 520, to filler neck.

Pressure-test the system; the pressure must remain unchanged for at least 5 minutes.

Setting:

• Test pressure: 1.5 bar (21.34 psi)

Installation is the reverse of the removal procedure.

See this article in russian language

Article about repair motorcycles «BMW F-series F 650 GS» (2000-2007): «Checking cooling system for leaks»: https://motoinstruction.ru/en/BMW/F/F650GS/engine/cooling/112627 <a href="https://motoinstruction.ru/en/BMW/F/F650GS/engine/cooling/112627">Checking cooling system for leaks</a> - article about repair motorcycles «BMW F-series F 650 GS» (2000-2007) from section «Cooling system». [url=https://motoinstruction.ru/en/BMW/F/F650GS/engine/cooling/112627]Checking cooling system for leaks[/url] - article about repair motorcycles «BMW F-series F 650 GS» (2000-2007) from section «Cooling system».