Removing and installing coolant hoses (BMW F650GS)

0

Place motorcycle on its centre stand.

Remove left cover.

Drain coolant. See Group 00.

Remove the right-hand coolant hose.

Remove the left-hand coolant hose between radiator and frame.

Replacing coolant hose (radiator/water pump)

Use pliers, BMW # 175500, to open the clamp securing the coolant hose to the water pump.

Disconnect the coolant hose from the radiator.

Replacing coolant hose (filler bowl/expansion tank)

Disconnect the expansion tank from the radiator and pull it to one side.

Disconnect the coolant hose from the radiator and the expansion tank.

Tightening torque:

• Coolant hoses to radiator/engine/frame: 2 Nm

See this article in russian language

Article about repair motorcycles «BMW F-series F 650 GS» (2000-2007): «Removing and installing coolant hoses»: https://motoinstruction.ru/en/BMW/F/F650GS/engine/cooling/112628 <a href="https://motoinstruction.ru/en/BMW/F/F650GS/engine/cooling/112628">Removing and installing coolant hoses</a> - article about repair motorcycles «BMW F-series F 650 GS» (2000-2007) from section «Cooling system». [url=https://motoinstruction.ru/en/BMW/F/F650GS/engine/cooling/112628]Removing and installing coolant hoses[/url] - article about repair motorcycles «BMW F-series F 650 GS» (2000-2007) from section «Cooling system».