![](https://motoinstruction.ru/img/bmw/10/117025.jpg)
Remove the seat.
Remove fasteners securing turn indicator (3) and disconnect plug of turn indicator.
Slacken front securing screw (4).
Remove securing screws (1) from side cover.
Remove side cover (6).
Installation is the reverse of the removal procedure: pay particular attention to the following.
Caution! When installing turn indicators, make sure that turn indicator cable is not trapped.
Tightening torques:
- Right/left covers with centre cover to mounting frame: 2 Nm
- Right/left covers to centre cover: 2 Nm