Cylinder head — replacing rocker arm bushings (Harley Sportster XL1200)

0

PART NUMBER	TOOL NAME
HD-94804-57	ROCKER ARM BUSHING REAMER

1. See Figure 3-58. To replace worn bushings, press or drive them from the rocker arm. If bushing is difficult to remove, turn a 9/16-18 tap into bushing. From opposite side of rocker arm, press out bushing and tap using a discarded rocker arm shaft.



2. Press replacement bushing into rocker arm, flush with rocker arm end, and split portion of bushing towards top of rocker arm.

3. Using remaining old bushing as a pilot, line ream new bushing with ROCKER ARM BUSHING REAMER (Part No. HD-94804-57).

4. Repeat for other end of rocker arm.

See this article in russian language

Article about repair motorcycles «Harley Sportster XL1200» (2012-2023): «Cylinder head — replacing rocker arm bushings»: https://motoinstruction.ru/en/Harley/Sportster/XL_2012/engine/repair/113053 <a href="https://motoinstruction.ru/en/Harley/Sportster/XL_2012/engine/repair/113053">Cylinder head — replacing rocker arm bushings</a> - article about repair motorcycles «Harley Sportster XL1200» (2012-2023) from section «Engine repair». [url=https://motoinstruction.ru/en/Harley/Sportster/XL_2012/engine/repair/113053]Cylinder head — replacing rocker arm bushings[/url] - article about repair motorcycles «Harley Sportster XL1200» (2012-2023) from section «Engine repair».