Fuel tank — cleaning and inspecting (Harley V-Rod VRSCA)

0

1. Drain the fuel tank. Use a common pump or siphon and an approved gasoline storage container of sufficient capacity.

2. Remove fuel pump/filter/fuel level sender assembly from tank.

3. Clean the tank interior with commercial cleaning solvent or a soap and water solution. Shake the tank to agitate the cleaning agent.

4. Flush the tank thoroughly after cleaning and allow it to air dry.

Warning! Extreme caution should be taken when repairing tanks. If all traces of fuel are not purged, an open flame repair may result in a tank explosion which could result in death or serious injury.

5. Inspect the evaporative emissions system vapor valve line and pressure and return fuel lines for cuts, cracks or holes. Replace lines as needed.

6. Inspect the tank for leaks and other damage. If damaged, replace it.

See this article in russian language

Article about repair motorcycles «Harley V-Rod VRSCA» (2002-2006): «Fuel tank — cleaning and inspecting»: https://motoinstruction.ru/en/Harley/V-Rod/VRSCA/engine/fuel/110528 <a href="https://motoinstruction.ru/en/Harley/V-Rod/VRSCA/engine/fuel/110528">Fuel tank — cleaning and inspecting</a> - article about repair motorcycles «Harley V-Rod VRSCA» (2002-2006) from section «Fuel system». [url=https://motoinstruction.ru/en/Harley/V-Rod/VRSCA/engine/fuel/110528]Fuel tank — cleaning and inspecting[/url] - article about repair motorcycles «Harley V-Rod VRSCA» (2002-2006) from section «Fuel system».