Pressure side fuel filter — removal and installation (Harley V-Rod VRSCA)

0

See Figure 4-5. The pressure side filter (2) filters the fuel before it inters the pressure fuel line. The pressure side filter is serviced at a service interval of 161,000 kilometers (100,000 miles) or at anytime the fuel pump is serviced.

Removal

PART NO.	SPECIALTY TOOL
HD-41137	Hose clamp pliers

To remove, cut the clamps and disconnect the two hoses (6) from the filter. Press the pressure side filter up and out of the bracket.

Installation

To replace, press a new pressure side filter into its bracket up against the bracket stop, replace the fuel crossover hose and the pressure fuel line, and install a new clamp over the crossover hose using side of HOSE CLAMP PLIERS (HD-41137).

See this article in russian language

Article about repair motorcycles «Harley V-Rod VRSCA» (2002-2006): «Pressure side fuel filter — removal and installation»: https://motoinstruction.ru/en/Harley/V-Rod/VRSCA/engine/fuel/110524 <a href="https://motoinstruction.ru/en/Harley/V-Rod/VRSCA/engine/fuel/110524">Pressure side fuel filter — removal and installation</a> - article about repair motorcycles «Harley V-Rod VRSCA» (2002-2006) from section «Fuel system». [url=https://motoinstruction.ru/en/Harley/V-Rod/VRSCA/engine/fuel/110524]Pressure side fuel filter — removal and installation[/url] - article about repair motorcycles «Harley V-Rod VRSCA» (2002-2006) from section «Fuel system».