Operating mode without siren signal
In operating mode without a siren signal, the siren does not sound a sound signal, either when the security system is on or when it is off.
Note. When the security system is enabled, even if the siren is in silent mode, it will sound warning signals and will sound in continuous alarm cycles.
Operation mode with siren signals
When the security system is turned on and the siren signal mode is turned on, the siren will emit two short beeps. When the security system is turned off, the siren will sound once.
Switching modes
By quickly turning the security system on and off twice, you can switch the system from a mode without siren signals to a mode with siren signals (or vice versa).
1. With the key fob near the motorcycle, the ignition switch is set to IGNITION and the security system is turned off, set the ignition switch to OFF.
2. Once the security system is turned on (The turn signals will flash twice), immediately turn the ignition switch to the IGNITION position.
3. Wait until the security lamps turn off and immediately turn the ignition switch to the OFF position.
4. Once the security system is turned on (The turn signals will flash twice), immediately turn the ignition switch to the IGNITION position and wait until the system turns off.