Recommended lubricant: Camshaft/Bushing: Molybdenum disulfide oil
2. Install:
- camshaft (1)
- camshaft bushing (2)
Note:
- The dowel pin (a) on the end of the camshaft must align with the timing mark (b) on the cylinder head.
- Make sure that the No.1 camshaft (3) is installed in the rear cylinder head and the No.2 camshaft (4) is installed in the front cylinder head.
3. Install: stopper plate (1)
- Stopper plate bolt (2): 20 Nm (2.0 m·kg)
4. Lubricate: rocker arm shafts
- Recommended lubricant: Engine oil
5. Install:
- rocker arms
- rocker arm shafts
Note: Make sure that the rocker arm shafts is completely pushed into the cylinder head.