Disassembly valve covers and upper rocker arms (Ducati ST2)

0

Note. When disassembling components in the cylinder head, they must be laid out carefully or marked so that they can be reassembled in their exact position.

Unscrew the retaining screws and pull out the valve covers.



Unscrew the retaining screws and pull out the timing system support cap.



Remove the opening rocker arm pins using service tool 88713.0120.




Pull out the rocker arms. Keep the springs and do not damage or lose the shims.

See this article in russian language

Removing the rocker arms and camshaft Yamaha Drag Star 1100 (1998-2008)
Rocker arms Harley Street 500 (2014-2021)
Valve covers — removal and installation Honda Africa Twin 750 (1989-2003)
Checking/adjusting valve clearances BMW R 1150 GS (1999-2004)
Valve clearances Triumph Rocket III (2004-2018)

Article about repair motorcycles «Ducati ST series ST2» (1997-2003): «Disassembly valve covers and upper rocker arms»: https://motoinstruction.ru/en/Ducati/ST/ST2/engine/repair/112131 <a href="https://motoinstruction.ru/en/Ducati/ST/ST2/engine/repair/112131">Disassembly valve covers and upper rocker arms</a> - article about repair motorcycles «Ducati ST series ST2» (1997-2003) from section «Engine repair». [url=https://motoinstruction.ru/en/Ducati/ST/ST2/engine/repair/112131]Disassembly valve covers and upper rocker arms[/url] - article about repair motorcycles «Ducati ST series ST2» (1997-2003) from section «Engine repair».