- It prevents the engine from starting when the gear is engaged and the side stand is raised, but with the clutch lever released.
- It prevents the engine from starting when the gear is engaged and the clutch lever is depressed, but with the side stand lowered.
- It causes the engine to stop when the side stand is lowered while in gear.
Periodically check the operation of the ignition interlock system by performing the following procedures.
Warning! If any malfunction is detected, have this system checked by a Yamaha dealer before you continue to operate the motorcycle.
With the engine stopped: 1. Lower the side stand. 2. The engine stop switch must be in the " ![]() 3. Turn the key to the "ON" position " ("ON"). 4. Place the transmission in neutral. 5. Press the starter switch. Does the engine start? | NO → | The neutral switch may be faulty. The motorcycle must not be ridden until it has been inspected by a Yamaha dealer. |
YES ↓ | ||
With the engine running: 6. Raise the side stand. 7. Keep the clutch lever depressed. 8. Turn on some gear. 9. Lower the side stand. Has the engine stopped? | NO→ | The side stand switch may be faulty. The motorcycle should not be ridden until it has been inspected by a Yamaha dealer. |
YES ↓ | ||
After the engine has stopped: 10. Raise the side stand. 11. Keep the clutch lever depressed. 12. Press the starter switch. Does the engine start? | NO → | The clutch switch may be faulty. The motorcycle must not be ridden until it has been inspected by a Yamaha dealer. |
YES ↓ | ||
The system is working properly. You can ride a motorcycle |