2. Place a container under the engine oil drain bolt.
3. Remove:
- Engine oil filler cap "1"
- Engine oil drain bolt "2" (along with the gasket)
4. Drain:
- Engine oil (completely from the crankcase)
5. If the oil filter cartridge is also to be replaced, perform the following procedure.
a. Remove the oil filter cartridge "1" with an oil filter wrench "2".
Oil filter wrench 90890-01426 YU-38411.
b. Lubricate the O-ring "3" of the new oil filter cartridge with a thin coat of engine oil.
Caution! Make sure the O-ring "3" is positioned cor-recly inthe groove of the oilfilter cartridge.
c. Tighten the new oil filter cartridge to specification with an oil filter wrench.
Oil filter cartridge — 17 Nm (1.7 m·kg, 12 ft·lb).
6. Replace:
- Engine oil drain bolt gasket
7. Install:
- Engine oil drain bolt (along with the new gasket)
Engine oil drain bolt — 43 Nm (4.3 m·kg, 31 ft·lb).
8. Fill:
- Crankcase (with the specified amount of the recommended engine oil)
1. Quantity
Total amount:
- 3.80 L (4.02 US qt) (3.34 Imp.qt) Without oil filter cartridge replacement
- 2.90 L (3.07 US qt) (2.55 Imp.qt) With oil filter cartridge replacement
- 3.10 L (3.28 US qt) (2.73 Imp.qt)
9. Install:
- Engine oil filler cap
10. Start the engine, warm it up for several minutes, and then turn it off.
11. Check:
- Engine (for engine oil leaks)
12. Check:
- Engine oil level. Refer to «Checking the engine oil level».