Visual and acoustic signalling system (Aprilia RS125/3)

0

Warning horn test

To test warning horn operation:

• Feed 12 Volts to the two connectors of the warning horn.
• Adjust through the adjuster screw if needed.

Flasher test

When none of the direction indicators is working, there might be a problem with the flasher.

To test flasher operation:

Disconnect the connector (1) of the flasher (2).

Fit a jumper across connector (1).



Operate the direction indicator control (3).



If the indicator lights come on but do not flash, replace the flasher (2).


It may also be necessary to check: the 20-A main fuses and the electrical system.

When the bulb of a direction indicator burns out, each time the control (3) is operated the other indicator and the repeater light on the instrument panel will come on but will not flash.

(The article is taken from the website: MOTOINSTRUCTION)

See this article in russian language

Exhaust system fasteners Suzuki DRZ 250 (1996-2007)
Tampering with noise control system prohibited Triumph Rocket III (2004-2018)
Immobilizer system Yamaha FZ1 Fazer (2006-2015)
Fuel system exploded view Kawasaki ZX6R/ZX600J (2000-2002)
Radiator of the cooling system — removal and installation Honda CB 400 SF (1992-1999)

Article about repair motorcycles «Aprilia RS-series RS 125» (1998-2005): «Visual and acoustic signalling system»: https://motoinstruction.ru/en/Aprilia/RS/RS125-3/electric/equipment/112918 <a href="https://motoinstruction.ru/en/Aprilia/RS/RS125-3/electric/equipment/112918">Visual and acoustic signalling system</a> - article about repair motorcycles «Aprilia RS-series RS 125» (1998-2005) from section «Equipment and devices». [url=https://motoinstruction.ru/en/Aprilia/RS/RS125-3/electric/equipment/112918]Visual and acoustic signalling system[/url] - article about repair motorcycles «Aprilia RS-series RS 125» (1998-2005) from section «Equipment and devices».