Note. For ease of reference, the same numbering is used in the specific wiring diagrams and in the general schematics.
Wiring colour codes
| Ar | Orange |
| Az | Light blue |
| B | Blue |
| Bi | White |
| G | Yellow |
| Gr | Grey |
| M | Brown |
| N | Black |
| R | Red |
| Ro | Pink |
| V | Green |
| Vi | Violet |
Electrical connectors
Disconnect the electrical connectors as follows:
Press down on the locking tab, where fitted.
A Warning! Never separate two connectors by pulling on the wiring.
Grasp both connectors and pull them in opposite directions until they become separated.
Remove any dirt, rust, moisture, etc. from inside the connector blowing with compressed air.
Ensure that the wires are securely crimped to the terminals inside each connector.
Note. A connector will only locate properly into the matching connector when it is inserted in the correct mounting position.
When refitting, reconnect the two connectors and ensure that they become fully engaged (where fitted, the locking tab will click audibly into place).