Torque wrench settings:
- Screw (2): 22 Nm (2.2 kg·m)
Remove the air dam; see 7.1.3.
Disconnect the two connectors (1).
Release and remove the screw (2).
Remove the horn.
Warning horn removal (Aprilia RS125/3)
Read 1.2.1 carefully.
Torque wrench settings:
Remove the air dam; see 7.1.3.
Disconnect the two connectors (1).
Release and remove the screw (2).
Remove the horn.
Torque wrench settings:
Remove the air dam; see 7.1.3.
Disconnect the two connectors (1).
Release and remove the screw (2).
Remove the horn.
See this article in russian language
This article has been reviewed: Artemy Kuzmin
Similar articles about motorcycles of other brands
Warning/caution/note Suzuki V-Strom DL-650 (2004-2011)Low oil pressure warning light switch — removal and… Triumph Rocket III (2004-2018)
Checking the horn Yamaha FZ1 Fazer (2006-2015)
Oil pressure warning light goes on Kawasaki ZX6R/ZX600J (2000-2002)
Horn — Checking, Removing and Installing Honda CB 400 SF (1992-1999)
Link to this article in different formats
TEXTHTMLBB Code
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Maintenance
- Troubleshooting
- Engine and systems
- Engine repair
- Fuel system
- Cooling and lube system
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear suspension
- Brake system
- Wheels and tires
- Electric equipment
- Equipment and devices
- Starting and charging system