Remove the lid of the rear stowage compartment.
Clamp the lid in a vise with protective jaws.
Use a punch of suitable diameter to drive out pin (1).
Remove latch (2).
Press out the lock.
Installation is the reverse of the removal procedure.
Removing and installing lock for rear stowage compartment (BMW F650GS)
Place motorcycle on its centre stand.
Remove the lid of the rear stowage compartment.
Clamp the lid in a vise with protective jaws.
Use a punch of suitable diameter to drive out pin (1).
Remove latch (2).
Press out the lock.
Installation is the reverse of the removal procedure.
Remove the lid of the rear stowage compartment.
Clamp the lid in a vise with protective jaws.
Use a punch of suitable diameter to drive out pin (1).
Remove latch (2).
Press out the lock.
Installation is the reverse of the removal procedure.
See this article in russian language
Similar articles about motorcycles of other brands
Honda CB 400 SF (1992-1999): Ignition Switch (Lock) — Checking, Removing and Installing
Triumph Tiger 800 (2010-2019): Front or Rear Wheel Actuator (Hydraulic Control) Wheel Lock
Yamaha FZ1 Fazer (2006-2015): Removing the rear brake pads
Ducati ST2 (1997-2003): Removing the rear brake cylinder support and rear brake pedal
Kawasaki Versys 650 (2007-2025): Removing and installing the valves
Harley Street 500 (2014-2021): Removing and installing pistons
Aprilia RS 125/3 (1998-2005): Removing the rear mudguard
Suzuki DRZ 250 (1996-2007): Removal engine components without removing the engine from the motorcycle
Link to this article in different formats
TEXTHTMLBB Code
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Maintenance
- Engine and systems
- Engine repair
- Ignition system
- Fuel and exhaust systems
- Cooling system
- Transmission
- Running gear and frame
- Frame and hinged elements
- Handlebar
- Rear suspension
- Brake system
- Wheels and tires
- Electric equipment
- Equipment and devices
- Lighting and lamps