![](https://motoinstruction.ru/img/bmw/21/127412.jpg)
- Lightly oil the shaft sealing ring (1).
- Using drift, BMW No. 33 1 860, and handle, BMW No. 00 5 500, drive in shaft sealing ring (1).
Caution: Do not overheat shaft sealing ring and cordring seal.
- Lightly oil or grease cordring seal and install.
- Heat the housing cover to 60°C (140°F) and place it on the crown wheel.
- Tighten securing screws in diagonally opposite sequence.
Tightening torque:
- Housing cover to housing — 35 Nm