- Slacken screws securing front left footrest plate.
![](https://motoinstruction.ru/img/bmw/21/127237.jpg)
- Remove the 2 retaining screws (arrows).
Caution: Do not damage the side case when removing the heat shield: use masking tape to protect the case if necessary.
- Pull heat shield toward rear to remove.
- Installation is the reverse of the removal procedure: pay particular attention to the following.
![](https://motoinstruction.ru/img/bmw/21/127238.jpg)
- Engage tab at front in bore (arrow) in main frame.
Tightening torque:
- Footrest plate to frame — 21 Nm