Removing the exhaust manifold (Aprilia Shiver 750)
- Main
- Aprilia
- Shiver
- SL 750
- Running gear and frame
- Frame and hinged elements
- Removing the exhaust manifold
The engine and the exhaust system components get very hot and remain in this condition for a certain time interval after the engine has been switched off. Before handling these components, make sure that you are wearing insulating gloves or wait until the engine and the exhaust system have cooled down.
Unscrew and remove the two nuts on the head exhaust stud bolts.
Loosen the clamp.
Remove the exhaust manifold.
Loosen the exhaust pipe between the manifold and the exhaust end.
Unscrew and remove the two nuts on the head exhaust stud bolts.
See also specifications for this operation.
Front
Unscrew and remove the two nuts on the head exhaust stud bolts.
Loosen the clamp.
Remove the exhaust manifold.
Rear
Loosen the exhaust pipe between the manifold and the exhaust end.
Unscrew and remove the two nuts on the head exhaust stud bolts.
See also specifications for this operation.
See this article in russian language
This article has been reviewed: Serafim Sazonov
Similar articles about motorcycles of other brands
Removing and installing exhaust manifold and oxygen sensor БМВ F 650 GS (2000-2007)Removing the exhaust pipe and muffler Yamaha YZF-R1 (2009-2014)
Removing the exhaust system Ducati ST2 (1997-2003)
Exploded view — exhaust system Triumph Rocket III (2004-2018)
Exhaust system fasteners Suzuki DRZ 250 (1996-2007)
Link to this article in different formats
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Control devices
- Operation manual
- Technical characteristics
- Maintenance
- Engine and systems
- Engine repair
- Lubrication system
- Cooling system
- Fuel system
- Transmission
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear suspension
- Brake system
- Electric equipment
- Equipment and devices