Remove
1. See Figure 3-76. Remove jiffy stand.
- a. Remove spring (2).
- b. Remove cam (3) from left footpeg mount (6).
- c. Remove E-clip (5).
- d. Remove cam stop pin (4) and jiffy stand (1).
![](https://motoinstruction.ru/img/harley/22/127759.jpg)
Figure 3-76. Jiffy Stand: 1. Jiffy stand; 2. Spring; 3. Cam; 4. Cam stop pin; 5. E-clip; 6. Left footpeg mount
Install
1. See Figure 3-76. Install jiffy stand.
- a. Align jiffy stand (3) to left footpeg mount (6).
- b. Insert cam stop pin (4).
- c. Install E-clip (5).
- d. Orient cam (3) over cam stop pin as shown. Install on left footpeg mount.
- e. Install spring (2).
Clean and inspect
1. Clean all parts thoroughly.
2. Inspect jiffy stand.
- a. Inspect cam stop pin for wear. Replace as necessary.
- b. Lubricate cam stop pin with SPECIAL PURPOSE GREASE.
- c. Inspect jiffy stand for wear. Replace as necessary.
- d. Inspect left footpeg mount for wear. Replace as necessary. See Rider foot controls.