Remove
1. See Figure 3-72. Remove footpeg assembly.
- a. Remove retaining ring (4).
- b. Remove clevis pin (5).
- c. Remove footpeg assembly (2).
- d. Remove spring washer (3).
![](https://motoinstruction.ru/img/harley/22/127755.jpg)
Figure 3-72. Passenger Footrest: 1. Frame tab; 2. Footpeg assembly; 3. Spring washer; 4. Retaining ring; 5. Clevis pin
Install
Warning: Footrests must fold up and toward rear of motorcycle if struck. Failure to set footrests to fold up and back could result in death or serious injury.
1. See Figure 3-72. Install footpeg assembly.
- a. Align footpeg assembly (2) to frame tab (1).
- b. Install spring washer (3).
- c. Install clevis pin (5).
- d. Install retaining ring (4).
Clean and inspect
1. Clean all parts thoroughly.
2. Inspect footpeg mount bushings for wear. Replace or repair as necessary.
3. Inspect rubber footpeg assemblies for wear. Replace as necessary.
4. Lubricate clevis pins with SPECIAL PURPOSE GREASE.