Engine start and battery charging system of motorcycle Harley Street 750 (2014-2021)

Removing and installing starter
Prepare 1. Disconnect negative battery cable. See Power disconnect. 2. Remove exhaust system. See Exhaust system. Remove 1. See Figure 8-5. Remove starter cable. a. Remove cover (3). b. Remove locknut (5). c. Remove starter cable (4). 2. Remove...

Starter solenoid
Prepare 1. Remove seat. See Removing and installing seat. 2. Disconnect negative battery cable. See Power disconnect. Remove 1. See Figure 8-6. Disconnect starter solenoid connector (5). 2. Remove battery and starter cables. a. Remove cover (1). b....

Removing and installing alternator
Prepare 1. Disconnect negative battery cable. See Power disconnect. 2. Remove left side rider foot control assembly. See Rider foot controls. 3. Remove alternator cover. See Alternator cover. Remove PART NUMBERTOOL NAME HD-51463ALTERNATOR ROTOR...

Voltage regulator
Prepare 1. Remove main fuse. See Power disconnect. 2. Remove radiator shroud. See Removing and installing radiator. Remove Voltage Regulator 1. See Figure 8-8. Remove voltage regulator. a. Disconnect voltage regulator connectors (5, 6). b. Remove...

Ignition switch
Prepare 1. Remove main fuse. See Power disconnect. 2. Remove headlamp fairing. See Headlamp fairing. 3. Remove handlebar. See Removing and installing handlebar. 4. Remove fuel tank. See Fuel tank. Remove 1. See Figure 8-9. Disconnect ignition switch...

Ignition coil
Prepare 1. Remove main fuse. See Power disconnect. Remove 1. See Figure 8-11. Remove cover (4). 2. Remove ignition coil. a. Disconnect cables (2, 3). b. Remove screws (5). c. Disconnect ignition coil connector. d. Remove ignition coil (6). e. Remove...

Spark plug cable
Remove Warning: Disconnecting spark plug cable with engine running can result in electric shock and death or serious injury Notes: Remove cable end by pulling on rubber boot only. Do not pull on cable or damage can result. Pull and twist...