Attention! Before removing the center stand, the motorcycle must be securely secured against a possible fall.
Removing
The left footrest bracket, swingarm and muffler have been removed for clarity.
1. Using a 10 mm wrench, unscrew the axle mounting bolt.
![](https://motoinstruction.ru/img/honda/1/110573.jpg)
2. Using pliers, remove the center stand spring. It is recommended to do this with the stand folded - in this case you will have to use less effort.
![](https://motoinstruction.ru/img/honda/1/110574.jpg)
3. Remove the stand spring.
![](https://motoinstruction.ru/img/honda/1/110575.jpg)
4. Using pliers, remove the cotter pin of the stand axis.
![](https://motoinstruction.ru/img/honda/1/110576.jpg)
5. Remove the axle washer.
![](https://motoinstruction.ru/img/honda/1/110577.jpg)
6. Using a drift, as shown in the photo, knock out the axis of the stand with light blows of the hammer.
![](https://motoinstruction.ru/img/honda/1/110578.jpg)
7. We remove the axis of the stand and remove the stand by sliding it down and forward.
![](https://motoinstruction.ru/img/honda/1/110579.jpg)
Installation
We install the center stand in the reverse order, lubricating the axle with grease.