Prepare
1. Remove seat. See Removing and installing seat.
Remove
1. See Figure 3-63. Remove rear fender.
- a. Remove long screws (3) and short screws (4).
- b. Remove fender support covers (2).
- c. Remove spacers (5).
- d. Remove rear fender (1).
Figure 3-63. Rear Fender: 1. Rear fender 2. Fender support cover (2) 3. Long screw (2) 4. Short screw (2) 5. Spacer (2)
Install
FASTENER | TORQUE VALUE | |
Rear fender screw | 45.0-55.0 Nm | 34-40 ft·lbs |
1. See Figure 3-63. Install rear fender.
- a. Install rear fender (1).
- b. Insert long screws (3) and short screws (4) through fender support covers (2) and spacers (5).
- c. Install fender support cover assemblies. Tighten to 45.0-55.0 Nm (34-40 ft·lbs).
Complete
1. Install seat. See Removing and installing seat.