Prepare
1. Remove seat. See Removing and installing seat.
2. Remove main fuse. See Power disconnect.
Remove
1. See Figure 8-32. Remove turn signal flasher.
- a. Disconnect turn signal flasher connector (2).
- b. Remove turn signal flasher (1).
Install
1. See Figure 8-32. Install turn signal flasher.
- a. Install turn signal flasher (1).
- b. Connect turn signal flasher connector (2).
Figure 8-32. Turn Signal Flasher: 1. Turn signal flasher; 2. Turn signal flasher connector
Complete
1. Install main fuse. See Power disconnect.
2. Install seat. See Removing and installing seat.
Warning: Be sure that all lights and switches operate properly before operating motorcycle. Low visibility of rider can result in death or serious injury.
3. Test turn signals for proper operation.