![](https://motoinstruction.ru/img/honda/9/115458.jpg)
If the front and rear exhaust pipe covers were removed, temporarily install the exhaust pipe covers when installing the exhaust system onto the engine and tighten the cover band bolts after installing the exhaust system.
Install the exhaust pipe cover by aligning the holders with the tabs of the flange retainer.
![](https://motoinstruction.ru/img/honda/9/115459.jpg)
Install the right step holder and collar.
Install and tighten the bolts and nut to the specified torque.
Torque: 39 N·m (4.0 kgf·m, 29 lbf·ft).
![](https://motoinstruction.ru/img/honda/9/115460.jpg)
Install the rear master cylinder reservoir, cover and bolt.
Tighten the rear master cylinder reservoir cover bolt to the specified torque.
Torque: 12 N·m (1.2 kgf·m, 9 lbf·ft).
![](https://motoinstruction.ru/img/honda/9/115461.jpg)