Footboard removal/installation
Left side
Remove:
- Shift Pedal Clamp Bolt [A]
- Footboard Bracket Bolts [B]
- Left Footboard Assembly [C]
Install the shift pedal to the front shift lever so that the punch mark [A] on the pedal align to the punch mark [B] on the shift lever.
Tighten:
- Footboard Bracket Bolts: 34 N·m (3.5 kgf·m 25 ft·lb)
- Shift Pedal Clamp Bolt: 12 N·m (1.2 kgf·m 106 in·lb)
Right side
Remove:
- Brake Pedal Clamp Bolt [A]
- Brake Pedal [B]
- Rear Master Cylinder Mounting Bolts [C]
- Right Footboard Bracket Bolts [D]
Remove:
- Brake Pedal Return Spring [A]
- Brake Light Switch [B]
- Brake Lever [C]
Install:
- Brake Lever [A]
- Brake Light Switch [B]
- Brake Pedal Return Spring [C]
Install:
- Right Footboard Assembly
Tighten:
- Footboard Bracket Bolts: 34 N·m (3.5 kgf·m, 25 ft·lb)
- Rear Master Cylinder Mounting Bolts: 25 N·m (2.5 kgf·m 18 ft·lb)
Install the brake pedal so that the punch mark [A] on the brake lever shaft align to the brake lever punch mark [B].
Tighten:
- Brake Lever Clamp Bolt [C]: 25 N·m (2.5 kgf·m 18 ft·lb)