To remove the oil pressure sensor, you must first remove the carburetor bar (see «Plank carburetors - removal and installation»).
Removing
1. Remove the rubber cap and use a Phillips screwdriver or a 7 mm wrench to unscrew the sensor terminal bolt.
![](https://motoinstruction.ru/img/honda/1/110093.jpg)
2. Using a 24 mm socket wrench, unscrew the sensor.
![](https://motoinstruction.ru/img/honda/1/110094.jpg)
Installation
Installation is carried out in the reverse order. We apply a thread lock to the threaded part of the sensor. We tighten the sensor with a torque of 10 Nm.