![](https://motoinstruction.ru/img/triumph/7/114745.jpg)
1. Rear light bulb; 2. Bulb holder
Warning! The bulb becomes hot during use. Always allow sufficient time for the bulb to cool before handling. Avoid touching the glass part of the bulb. If the glass is touched or gets dirty, clean with alcohol before reuse.
1. Remove the rider’s seat.
2. Disconnect the battery, negative (black) lead first.
3. The rear light bulb holder is accessed underneath the rear mudguard.
4. Rotate the bulb holder anti-clockwise to release.
5. To remove the bulb from the holder, gently pull on the bulb until it is released.
6. Installation for the bulb is the reverse of the removal procedure.
Caution! When reconnecting the battery, connect the positive (red) lead first.