Warning!
- Adjust road speed to suit the visibility and weather conditions in which the motorcycle is being operated.
- Ensure that the beams are adjusted to illuminate the road surface sufficiently far ahead without dazzling oncoming traffic. An incorrectly adjusted headlight may impair visibility causing an accident.
Warning!
- Never attempt to adjust a headlamp beam when the motorcycle is in motion.
- Any attempt to adjust a headlamp beam when the motorcycle is in motion may result in loss of control and an accident.
Note: The vertical beams of the left and right hand headlights can only be adjusted together. Independent adjustment is not possible.
1. Vertical beam adjuster
1. Turn the ignition switch to the ON position.
2. Remove the ignition switch cover.
3. Slacken the ciamp bolt sufficient to allow restricted movement of the headlights.
4. Adjust the position of the headlights to give the required beam setting.
5. Tighten the clamp bolt to 15 Nm.
6. Re-check the headlight beam settings.
7. Refit the igntion switch cover.
8. Turn the ignition off when both beam settings are satisfactorily set.