Headlight horizontal adjustment (Triumph Rocket III)
- Main
- Triumph
- Rocket
- Rocket III
- Electric equipment
- Equipment and devices
- Headlight horizontal adjustmen…
1. Horizontal beam adjuster
1. The horizontal beams of both headlights can be adjusted individually. The same procedure is used to adjust either headlight.
2. Turn the ignition switch to the ON position.
3. Slacken the headlight bowl fixing.
4. Adjust the horizontal position of the headlight to give the required beam setting.
5. Tighten the fixing to 15 Nm.
6. Repeat for the second headlight.
7. Re-check the headlight beam settings.
8. Switch the ignition off when both beams are satisfactorily set.
See this article in russian language
This article has been reviewed: Serafim Sazonov
Similar articles about motorcycles of other brands
Headlight beam — horizontal adjustment Kawasaki ZX6R/ZX600J (2000-2002)Headlight aim — check and adjustment Honda Africa Twin 750 (1989-2003)
Headlight adjustment Ducati Monster 696 (2007-2014)
Front fork adjustment Yamaha FZ1 Fazer (2006-2015)
Idle speed adjustment Suzuki DRZ 250 (1996-2007)
Link to this article in different formats
TEXTHTMLBB Code
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Engine and systems
- Engine repair
- Cooling system
- Lube system
- Fuel and control system
- Transmission
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear suspension
- Brake system
- Wheels and tires
- Electric equipment
- Equipment and devices
- Starting and charging system
- Electrical circuits