Warning! Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it from falling and causing injury to the operator or damage to the motorcycle.
1. Position the motorcycle on level ground and in an upright position.
Note: The coolant level within the expansion tank can be inspected, without removing any covers, by looking between the fuel tank and frame headstock on the left hand side of the motorcycle. Always inspect the coolant level with the engine cold.
2. The coolant level must be between the "MAX" (upper line) and "MIN" (lower line) marks in the expansion tank.
1. Expansion tank; 2. MAX mark; 3. MIN mark; 4. Fluid level
3. If the coolant is below the minimum level, or exceeds maximum, the coolant level must be adjusted.